Hanna DiST-1 Waterproof TDS Tester-HI98301

ABT-0006

New product

The Hanna HI98301 DiST-1 is a low-range total dissolved solids tester than can measure up to 2000 ppm (mg/L).

This tester designed specifically for Biofloc, aquariums or Fresh water that can displays results in parts per Million (ppm), This waterproof tester uses an ampere metric conductivity probe to determine the total dissolve Solid in the water. This robust tester displays the readings along with temperature on a large LCD.

  • Display Type : Digital,
  • 4 digit Display,
  • function :  TDS & Temperature,
  • Made in Romania.
  • 1 year Warranty
  • Original HANNA
  • Engrave “HANNA” Above the meter.

 

Best Use for:

  • Biofloc tank,
  • Aqua Culture,
  • Aquariums,
  • Pools,
  • Drinking Water,

If any Quarry Plz call :

  • +88 01676-414538
  • +88 017722-02305
  • e-mail : jericoBd@gmail.com

Special Note:*

  • All product delivered are subject to stock only.
  • Delivery of the product may take longer than the promised delivery time due to unavoidable reasons.

More details

7 Items

Tk. 5,000

-Tk. 300

Tk. 5,300

Free Google QRcode module from Mediacom87

Our Payment
Our Payment

More info

Package Include:

  • HI98301 tester with protective cap,
  • 1382 Calibration Reagent: 4pcs.
  • CR2032 Batteries : 1pcs
  • Instructions Manual: 1pcs.

Details

The DiST 1 features a large multi-level LCD which displays both TDS and temperature readings simultaneously. The TDS readings are displayed with a 1 ppm resolution and with an accuracy of ±2% full scale. The TDS range of the HI98301 is from 0 to 2000 ppm.

 

Temperature can be set to display in ℃ or ℉. The LCD screen has stability and calibration tag indicators. The battery percent level is displayed at start up alerting the user to the remaining battery power that is available.

 

TDS readings are performed by an amperometric graphite electrode that resists oxidation, providing better repeatability in measurements. The use of graphite also reduces the polarization effect common with amperometric testers that use two stainless steel pins. Calibration is performed by pressing the dedicated calibration button. Once in calibration mode submerge the probe in 1382 ppm calibration standard. When the standard value is recognized and stability reached, the meter will automatically accept and store the calibration value.

Setup options include automatic shut-off timing and temperature unit displayed. Automatic shut-off options are to turn the meter off after 8 minutes, 60 minutes, or disabled. To enter the setup mode the user presses a button located in the battery compartment.

 

Features/Benefits:

  • Slim, Ergonomic Design
  • With rounded edges and a case that is only 17 mm (0.7”) thick, the HI98301 is thin and fits comfortably in the hand or pocket.

 

Large Multi-level LCD

  • The LCD is 29 mm (1.125”) x 20 mm (0.81”) allowing the user to easily read both the pH and temperature simultaneously.
  • Two-button Operation
  • One for ON/OFF, the other for calibration.

 

Exposed Temperature Sensor

  • Temperature can be displayed in either oC or oF.

Automatic Calibration & Indicator

  • Automatic calibration at 1382 ppm (mg/L) with a single push of a button.
  • Automatic Shut-off
  • Low Battery Indicator

                                                      

 

 

Specification

  • TDS Range :0 to 2000 ppm (mg/L)
  • TDS Resolution : 1 ppm (mg/L)
  • TDS Accuracy : ±2% F.S.
  • TDS Calibration : automatic, one point at 1382 ppm
  • EC/TDS Temperature Compensation : automatic from 0 to 50°C (32 to 122°F)
  • Temperature Correction Coefficient : 1.9%/°C
  • EC to TDS Conversion Factor : 0.5
  • Temperature Range : 0.0 to 50.0°C (32.0 to 122.0°F)
  • Temperature Resolution : 0.1°C (0.1°F)
  • Temperature Accuracy : ±0.5°C (±1°F)
  • Automatic Shut-Off : 8 minutes, 60 minutes, or disabled
  • Battery Type/Life : CR2032 3V Li-Ion (1 pc.) / approximately 250 hours of continuous use
  • Environment : 0 to 50°C (32 to 122°F); RH 100%
  • Dimensions :            160 x 40 x 17 mm (6.3 x 1.6 x 0.7“)
  • Weight : 68 g (2.4 oz.) without battery

Reviews

Write a review

Hanna DiST-1 Waterproof TDS Tester-HI98301

Hanna DiST-1 Waterproof TDS Tester-HI98301

The Hanna HI98301 DiST-1 is a low-range total dissolved solids tester than can measure up to 2000 ppm (mg/L).

This tester designed specifically for Biofloc, aquariums or Fresh water that can displays results in parts per Million (ppm), This waterproof tester uses an ampere metric conductivity probe to determine the total dissolve Solid in the water. This robust tester displays the readings along with temperature on a large LCD.

  • Display Type : Digital,
  • 4 digit Display,
  • function :  TDS & Temperature,
  • Made in Romania.
  • 1 year Warranty
  • Original HANNA
  • Engrave “HANNA” Above the meter.

 

Best Use for:

  • Biofloc tank,
  • Aqua Culture,
  • Aquariums,
  • Pools,
  • Drinking Water,

If any Quarry Plz call :

  • +88 01676-414538
  • +88 017722-02305
  • e-mail : jericoBd@gmail.com

Special Note:*

  • All product delivered are subject to stock only.
  • Delivery of the product may take longer than the promised delivery time due to unavoidable reasons.

Accessories

Shere ------------ WhatsApp

Customers who bought this product also bought:

30 other products in the same category: